Genuine E3D Nozzles & Nozzle Packs

E3D Nozzles are the premier 3D Printing Nozzles on the market.

Please note - V6 nozzles are not compatible with Volcano, SuperVolcano or Cyclops Heater Blocks. 

Choose the right nozzle material for the filament you intend to use:

• Brass 
  • Brass nozzles, featuring E3D’s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C.  Brass Nozzles in our Store

• Plated Copper 
  • Our unique plated copper nozzles are suitable for high-temperature, non-abrasive applications. The nickel plating provides a reduced-stick surface, ideal for situations where temperatures are too hot for a silicone sock. Rated to a maximum temperature of 500°C.  Plated Copper Nozzles in our Store

• Hardened Steel
  • Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel Nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.  Hardened Steel Nozzles in our Store

• Nozzle Fun Pack
  • Looking for a variety of brass nozzles? The Nozzle Fun Pack contains a variety of nozzle diameters allowing you to experiment with different layer heights and track widths.  The Nozzle Fun Pack helps to understand these variables.  Nozzle Fun Packs in our Store
  • Pack contains:
    • 1 x 0.25mm brass nozzle                    1 x 0.3mm brass nozzle
    • 1 x 0.35mm brass nozzle                    1 x 0.5mm brass nozzle
    • 1 x 0.6mm brass nozzle                      1 x 0.8mm brass nozzle
    • 1 x E3D nozzle spanner
  • Please note - these nozzles are not compatible with the E3D Cyclops and Volcano HotEnds.

• Nozzle Pro Pack
  • Looking to develop your 3D printing skills? The Nozzle Pro Pack contains a variety of different nozzle diameters and materials allowing you to experiment with tiny details, larger stronger prints, high-temperature filaments and abrasive filled filaments.  Nozzle Pro Packs in our Store
  • Pack contains:
    • 1 x 0.15mm brass nozzle                        1 x 0.8mm brass nozzle
    • 1 x 0.25mm plated copper nozzle         1 x 0.4mm plated copper nozzle
    • 1 x 0.4mm hardened steel nozzle          1 x 0.6mm hardened steel nozzle
    • 1 x E3D nozzle spanner
  • Please note - these nozzles are not compatible with the E3D Cyclops and Volcano HotEnds.

BACK