ELEGOO Standard Resin

ELEGOO printers and resins are known around the world.

ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light and it’s VOC free resin. In the case of 3D printing, these are typically liquid plastic resins that harden when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin.

• Characteristics:
  • Photopolymer resin is specially designed to reduce shrinkage during the Photocuring process.
  • 405nm Rapid Resin was designed to significantly reduce print time with excellent fluidity.
  • Great stability and hardness guarantee a worry-free printing experience.
  • High quality pigments and photo-initiators are added to UV-Curing resin.
  • Leak-proof bottle fully wrapped with a bubble bag and purpose built box.

• Resin Specifications: 
  • Hardness: 84 D; Shrinkage: 7.1 %
  • Viscosity (25°C): 150-200 mPa.s
  • Liquid Density: 1.100 g/cm³
  • Solid Density: 1.195 g/cm³
  • Flexure Strength: 59-70 Mpa
  • Extension Strength: 36-53 Mpa
  • Elongation at Break: 14.2 %
  • Capacity: 500g; Shelf Life: 1 year
  • Colour Option: Grey, White, Green, Black, Transparent, Yellow, Blue, and Red
  • Exposure Parameter: First layer exposure: 20-60s; Normal 

• Precautions: 
  • Shake well before use
  • Use in a well ventilated area
  • Keep away from dust, direct sunlight, and children
  • Wear a mask and gloves to prevent direct skin contact
  • In the event of direct skin contact, immediately wash the area with plenty of water
  • When not using the resin, do not leave in the resin tank for over 48 hours.

Shop ELEGOO Standard Resin in our Store

BACK